StruXure does not publish prices, but reported installed costs run about $150–$200 per sq. ft., which puts a common 12x12 to 12x20 pergola at roughly $21,600–$48,000. A 12x16 model typically lands around $29,000–$45,000 with installation (HomeGuide, Angi and dealer-reported data, as of October 2026).
Updated October 8, 2026. Source: HomeGuide + 5 more. National US estimates.
StruXure makes motorized aluminum pergolas with rotating louvers that open for sun and close to block rain. Systems are sold and installed through local dealers and are custom-sized, so the company states that a single purchase price can't be given; every price depends on a measured site visit. WhatHomeCosts is not affiliated with StruXure.
Below are the market ranges reported by cost guides and dealers, what drives the price up, and how StruXure compares with other louvered and traditional pergolas. For a basic wood, vinyl or aluminum kit, see our pergola installation cost guide.
Average cost
Reported installed costs for StruXure louvered pergolas, based on market data as of October 2026:
| Scenario | Typical range | Notes |
|---|---|---|
| Small: 8x8 to 10x10 ft | $9,600–$20,000 | Patio-sized; fewer louvers and a single motor |
| Common: 12x12 to 12x20 ft | $21,600–$48,000 | Most residential projects; 12x16 about $29,000–$45,000 |
| Large: 16x20 to 20x20 ft | $48,000–$80,000 | Bigger spans, extra posts and beams |
| Add-ons (screens, heaters, fans, lighting) | several hundred to several thousand dollars | Priced per item by the dealer |
StruXure pergola cost by size
Installed estimates at the reported $150–$200 per sq. ft. (HomeGuide).
| Roof size | Square feet | Reported installed cost |
|---|---|---|
| 8 x 8 ft | 64 | $9,600–$12,800 |
| 10 x 10 ft | 100 | $15,000–$20,000 |
| 12 x 12 ft | 144 | $21,600–$28,800 |
| 12 x 16 ft | 192 | $28,800–$38,400 |
| 12 x 20 ft | 240 | $36,000–$48,000 |
| 16 x 20 ft | 320 | $48,000–$64,000 |
| 20 x 20 ft | 400 | $60,000–$80,000 |
How StruXure compares with other pergolas
| Pergola type | Installed cost per sq. ft. |
|---|---|
| StruXure (reported) | $150–$200 |
| Smart automatic louvered (general market) | $75–$175 |
| Motorized louvered (general market) | $55–$125 |
| Manual louvered | $45–$110 |
| Traditional wood, vinyl or aluminum pergola | $10–$65 |
Cost breakdown: materials, labor, permits and extras
Line-item estimate for a 12x16-ft (192 sq. ft.) StruXure louvered pergola installed by a dealer over an existing patio, with power run for the motor. Ranges are national, as of October 8, 2026.
| Cost item | Typical range | What it covers |
|---|---|---|
| Pergola system (aluminum frame, louvers, motor, controls) | $22,000–$32,000 | WhatHomeCosts estimate: reported total minus installation |
| Dealer installation | $5,000–$8,000 | Typical dealer installation budget |
| Footings or slab work | $0–$4,300 | None if the existing slab qualifies; a new slab or deck base costs $600–$4,300 |
| Electrical (outdoor circuit or outlet) | $150–$350 | More if a new circuit or long trench is needed |
| Permits | $60–$500 | Many towns require one for a permanent structure |
| Contingency (about 5%) | $1,000–$2,500 | Site leveling, landscaping repairs |
| Estimated total | $28,000–$47,500 | Before any discounts or rebates |
Lighting, screens, heaters and fans are usually quoted separately and can add several thousand dollars.
What affects the price
- Model and size. Size is the main driver: at reported rates of $150–$200 per sq. ft., a 10x10 runs about $15,000–$20,000 and a 20x20 about $60,000–$80,000. StruXure's Pergola X line includes several louver options (Pivot 6, Pivot 6 Slide, Pan 6 and others), and the modular Cabana X is positioned as a lower-priced starting point; the company does not publish model prices.
- Automation features. Every add-on raises the price. Market prices for comparable louvered systems include rain or wind sensors at about $125–$200, ceiling fans $150–$500 each, light fixtures $80–$300 each, heaters $150–$2,000 and misting systems $500–$2,000. Smart, app-controlled systems sit at the top of the louvered range.
- Installation and foundations. Dealer installation typically adds about $5,000–$8,000. The posts must be anchored to adequate concrete footings or a slab; if your patio doesn't qualify, new concrete or a deck base can cost $600–$4,300 or more, and the motor needs an outdoor circuit or outlet ($150–$350).
- Permits. Most jurisdictions treat a louvered pergola as a permanent structure. Permits typically run about $60–$500, and some towns exempt structures under 200 sq. ft. Ask the dealer whether permit fees and engineering drawings are included.
Ways to save
- Get quotes from at least two StruXure dealers and from one or two other louvered pergola brands; reported market rates for motorized louvered systems start around $55 per sq. ft., well below StruXure's reported range.
- Size the pergola to the area you actually use; each square foot adds roughly $150–$200 at reported rates.
- Add accessories selectively. A rain sensor is inexpensive and protects furniture, while screens, heaters and audio can be added later.
- Install over an existing slab or deck that meets the dealer's footing requirements to avoid new concrete work.
- Ask about off-season pricing and dealer promotions; StruXure itself doesn't advertise fixed prices, so dealer discounts vary by market.
How to get an accurate quote
Because StruXure prices only through local dealers after a site visit, ask at least two dealers (plus a competing brand) for written quotes. Share:
- The exact footprint you want covered and the surface underneath (concrete patio, deck, pavers or grass).
- The model or louver type you're considering and whether you want the roof to rotate, slide or both.
- The add-ons you want priced separately: rain sensor, lighting, screens, fans, heaters and app control.
- Ask what's included: footings, electrical work, permits, engineering, color choice and the length of the structural, finish and motor warranties.
FAQ
Why is StruXure more expensive than other pergolas?
StruXure systems are custom-sized, powder-coated aluminum structures with motorized rotating louvers, sold through dealers who handle installation. Reported prices of $150–$200 per sq. ft. compare with $10–$65 for traditional pergolas and about $55–$125 for many other motorized louvered systems.
Does StruXure publish its prices?
No. The company states that its pergolas are custom-made, so it can't provide a single price; you get a quote from a local dealer after measuring. The ranges on this page come from cost guides and dealer-reported projects, not from StruXure.
Is a StruXure pergola worth it?
It depends on how much you value adjustable shade and rain protection. A louvered roof makes an outdoor space usable in more weather than an open pergola, but the same footprint as a basic kit costs several times more. Compare the total with a patio enclosure if year-round use is your goal.
For the big picture, start with our complete fence installation cost guide.
Related cost guides
Sources
- HomeGuide — How Much Do StruXure Pergolas Cost? (2026) (May 3, 2024). Checked October 8, 2026.
- HomeGuide — How Much Does A Louvered or Motorized Pergola Cost? (2026) (Feb 10, 2026). Checked October 8, 2026.
- Angi — How Much Does a Motorized Pergola Cost? [2026 Data] (updated Jul 8, 2026). Checked October 8, 2026.
- StruXure — What Does a StruXure Pergola Cost? (updated Jul 8, 2026). Checked October 8, 2026.
- The Luxury Pergola — What Does a StruXure Pergola Cost? (updated Jul 15, 2026 (competitor, not independent)). Checked October 8, 2026.
- HomeGuide — How Much Does a Pergola Cost? (2026 Prices) (Oct 1, 2024). Checked October 8, 2026.
Prices are estimates and vary by location and provider. See our methodology and editorial policy. Browse all yard & pests cost guides.